Electric flat car

Product Introduction

Electric flat car, also known as electric flat car, level car, trolley, cross-span car, electric track car, ground climbing car, etc., is a factory-based electric transportation vehicle. First of all, it is a track-type transportation vehicle, which requires the ground to be laid. The track is generally an I-shaped contact track; secondly, it is an electric-driven vehicle, which runs automatically under the drive of a motor reducer. Once again, it is a flat car with a flat table with a flat table without a cover. In special circumstances, it can also be non-planar but without a cover. The body has no steering wheel and only has a forward and backward direction (even if it turns, it is turned by the track). This type of vehicle has the characteristics of simple structure, easy to use, large load-bearing capacity, no fear of dirt or smashing, easy maintenance, and long service life. Because of its many advantages such as convenience, strength, economical, practical, and easy to clean, it has become a transportation tool for frequent transportation of heavy objects within the enterprise factory and between the factory buildings and the factory buildings at a short distance and fixed points.

Main uses

Electric flat trucks are mainly used for dynamic lifting and transporting water billets, etc.; electric kiln loading trucks, electric kiln discharge trucks, etc. for brick factories, kiln factories, refractory factories, ceramic factories, roasting factories, etc.; electric transport trucks for engineering, tunnels, sanitation, electric dump trucks, electric sanitation clearing trucks, etc. Electric transport trucks and electric dump trucks are also used in flour mills, beneficiation plants, foundries, chemical plants, furnace materials factories, breeding plants, etc.

Structural Advantages

As an efficient transportation equipment, the core advantages of the horizon are reflected in three aspects: load-bearing capacity, safety performance and scenario adaptability. Its structure adopts box beam welded frame and I-shaped track design 2, supporting loads of hundreds of kilograms to 100 tons. The dual-speed adjustment function takes into account transportation efficiency and precise positioning. In terms of safety, the track-oriented system avoids the risk of offset.

Main categories

1. Track flat car
There are seven main technical parameters of rail flatteners: power supply method, durable tonnage, countertop size, countertop height, rail length, rail spacing, and operation mode. The most important technical parameters are power supply method and durable tonnage. The rail electric flatteners determine their model by power supply method and their specifications are determined by durable tonnage.
2. Tow the flat car
When running the KPT series cable electric flat car, it is powered by the floor cables mopped by the flat car. One end of the cable is connected to the ground power supply, and the other end is introduced into the flat car through the iron clamping device of the electric flat car. The characteristics of this type of electric flat car are that the countertop height is low and it is easy to load and unload heavy objects, but the running distance cannot be too long, generally cannot exceed 100m, and cables can be easily wrapped when they are too long.
3. Battery series flat car
The KPX series is a battery-powered flat car that is powered by a battery.
The battery provides power to the DC traction motor, which drags the flat car to run. Compared with AC motors, DC motors have the advantages of being less likely to burn, have a large starting torque and strong overload capacity. It has greater safety performance and maneuverability and flexibility than KPJ and KPD series flat cars. It can drive on curves and switches. It has no restriction on running distance and no insulation requirements for tracks, so it is convenient to construct and has low cost.
There are 6 specifications of electric flat cars in this series. Each specification is divided into three types according to the power supply method: streamer, trench slip line and cable reel. According to the countertop type, it is divided into two types: plate countertop and rail countertop. If the user needs other table sizes, gauge and speed, you can also negotiate supply.

Parameter configuration